Our prototype pattern templates are foundational block slopers — available in our digital product store — that serve as a cost-effective starting point for designers who want to test ideas before investing in a full custom pattern. They are zero-ease base blocks (no wearing ease added), meaning you cut them, sew them in your fabric, and fit them to your model before sending back for finalization. They are NOT production-ready on their own — they require fitting, design adaptation, and finalization.

Browse our digital pattern templates →

Yes — we specialize in patterns for knits, strategically reducing pattern measurements relative to body measurements based on the fabric's stretch percentage and recovery to achieve negative ease and correct fit. A 50% stretch jersey requires a fundamentally different pattern than a 10% stretch ponte. We'll ask you for a fabric swatch and stretch test results to dial in the exact amount of negative ease your specific fabric needs.

Start your knit pattern project →

You have two options: send the sample as-is and we'll pattern its exact current shape, or specify the desired corrections and we'll use your fit model's measurements to fix the fit in the digital pattern directly. The key is to be explicit about your goal. "Pattern this sample exactly" is a different brief from "Pattern this sample but fix the armhole and add 1" to the hem." Both are valid — we just need clarity. If the fit issues are severe, it may be more cost-effective to address them in the physical sample first.

Tell us about your sample →

Yes — our production patterns include standard seam allowances built into every piece (typically 3/8" on seams and 1" on hems, unless you specify otherwise), so the files are ready to send directly to your cut-and-sew factory without modification. If you need a "net" pattern (no seam allowance, also called a sew line pattern) for use with an automated cutter or specific CAD workflow, just tell us during the brief and we'll deliver both versions. Seam allowance specifications can also be adjusted per construction zone — for example, tighter on neckbands, wider on hem allowances.

Browse our pattern making services →

Provide clear written feedback and photos of the sample sewn from our pattern, pointing to the specific fit or design issues on the fit model — this is how we translate what you see into precise digital adjustments. Vague feedback like "it doesn't fit" gives us nothing to work with. Specific feedback like "the back shoulder is dropping 3/4" and the side seam is twisting forward" lets us fix it precisely and quickly. One revision round is included in our standard service; additional rounds can be purchased separately.

View revision and alteration pricing →

Once your base-size pattern is approved via fit sample, the standard production path is: Pattern Grading (creating the full size run) → Shrinkage Compensation (if fabric has been washed/tested) → Marker Making (optimizing the cutting layout for fabric efficiency). After those steps, your factory has everything they need to begin bulk cutting and production. Each of these is a separate service we offer — and the order matters.

Browse grading and marker making services →

Yes — reverse engineering (creating a new pattern from an existing garment) is one of our most common requests, requiring two identical items: one we carefully deconstruct and press flat, and one kept intact for construction reference. We must own both during the process. We cannot create an accurate reverse-engineered pattern from photos, a single garment, or fabric pieces. Once the pattern is drafted, you own all rights to it. Please note: we will not reproduce patterns from garments you don't own the design rights to.

Start a reverse-engineering project →

Yes — if a sample sewn from our pattern (or any existing digital pattern) needs fit or design changes, we can alter the digital pattern file precisely using Gerber Accumark's modification tools. We do not alter physical garments — we modify the digital file. Common alterations include adjusting ease, repositioning style lines, reshaping armholes, adding or removing pockets, and correcting length. One round of revisions is included with new pattern orders; additional rounds and alterations to previously delivered or third-party patterns are priced separately.

View alteration and revision pricing →

A block (or sloper) is a basic, fitted pattern without any style details — no seam allowance, no ease, no design features — used as a reusable foundational template for developing multiple new styles quickly. Think of it as your brand's master blueprint:

• once you have a block that fits your fit model perfectly
• you can slash
• spread
• pivot it into dozens of different designs without starting from scratch each time

We sell ready-made blocks in our digital product store, or we can draft a custom block to your exact fit model measurements.

Browse our digital block templates →

Walking seams means physically matching and measuring each pair of adjoining pattern edges against each other to confirm they are identical in length and that curves flow together smoothly at every junction point. When seam lengths don't match — even by 1/8" — the factory sewer compensates by easing or stretching the fabric, which creates puckering, twisting, or buckling in the finished garment that no pressing can fix. We walk every seam pair as a mandatory final step in our quality check before any pattern file is delivered, using Gerber Accumark's measurement and comparison tools to verify within 1/32" tolerance.

Learn about our pattern quality standards →

Notches are small V-shaped or rectangular cuts on seam edges used to align pattern pieces during sewing; drill holes are interior marks pinpointing the exact placement of pockets, darts, rivets, and other features. Without accurate notches and drill holes, even a perfectly shaped pattern becomes impossible to sew consistently in production — workers can't align pieces correctly or place components accurately at speed. We add all critical markings as part of our standard pattern drafting process.

See our full pattern making service →

Shrinkage is the reduction in fabric dimensions after washing and drying — if not compensated for in the pattern, the finished washed garment will be smaller than intended, failing your size specifications. We offer a dedicated shrinkage compensation service:

• you send washed-and-dried fabric test blocks
• we measure the shrinkage percentage in both length and width
• we permanently enlarge the production patterns by exactly that amount

This must be done after grading and before marker making for bulk cutting.

Learn about our shrinkage compensation service →

Flat pattern making drafts shapes digitally in 2D CAD — using precise measurements, mathematical relationships, and industry-standard tools — while draping shapes fabric in 3D directly on a mannequin before transferring to paper. We specialize exclusively in flat pattern making using Gerber Accumark, which is the dominant method in industrial production because it is repeatable, scalable, and compatible with automated cutting systems. Draping is more common in high-fashion ateliers but does not translate directly to mass production without being converted to flat patterns first.

Explore our digital pattern making services →

Yes — pattern grading is a separate service we offer immediately after your base pattern is finalized and fit-approved, creating a complete size run (e.g., XS through XL or 2 through 22) using ASTM-standard grade rules customized to your brand's fit model. Grading must be done on a clean, approved base — never on a rough draft or ill-fitting pattern, as any fit issue in the base is amplified in every size. We commonly grade 5–7 size runs and specialize in extended plus-size ranges of 10+ sizes.

Learn about our pattern grading service →

The five most costly first-pattern mistakes are:

• not providing a physical sample
• having unclear fit expectations
• lacking a proper fit model
• underestimating the number of sample rounds needed
• skipping shrinkage testing before grading

Each mistake compounds the others — unclear expectations cause more revision rounds, which cost more time and money. Our 30+ years working with startups shaped our intake process specifically to prevent these pitfalls. Here's what to prepare:

Schedule an advisory session to plan your project correctly →

No — upon receipt of final payment, all intellectual property rights to the digital pattern files created for your specific design are fully transferred to you as the client, as outlined in our Terms of Service. We retain no rights to reproduce, sell, or use your patterns. We are happy to sign a Non-Disclosure Agreement before you share any designs, and we shred all physical materials after the project is complete. Your IP is yours.

Review our Terms of Service and IP policy →

A fit spec (fit specification) is a detailed measurement chart listing the target finished garment measurements at every key point — bust, waist, hip, length, sleeve, crotch, rise — that the pattern must achieve for your specific size. We use your fit specs to draft or correct patterns to hit precise numbers, rather than relying on generic industry averages. A well-written fit spec is one of the most valuable documents a brand can create, because it makes every future style consistent and eliminates subjective interpretation.

Book an advisory session to build your fit spec →

Yes — we specialize in plus-size pattern making and grading for all size ranges including plus, extended plus, and big & tall, using proportionally adjusted grade rules designed specifically for these bodies rather than simply scaling up straight-size patterns. Standard scaling distorts fit in plus sizes — armholes become too low, crotch curves don't match, hems balloon. Our plus-size expertise ensures correct proportion, comfort, and flattering silhouette across the full extended range.

Browse plus-size pattern services →

Ease is the intentional difference between your body measurements and the finished garment measurements — without ease, clothing would be impossible to put on and wear comfortably. There are two types: wearing ease (the minimum needed for movement) and design ease (added for the desired silhouette, from slim-fit to oversized). Our prototype block templates are "zero-zero" blocks with no ease added — a deliberate starting point — and you determine the design ease during fitting.

Browse our zero-ease block templates →

Every pattern we deliver goes through a final quality review:

• all seams are walked and trued for length accuracy
• notches are checked for placement consistency
• grainlines are verified
• drill holes are confirmed
• the complete pattern is plotted at 100% scale to catch any digital errors before it reaches you

This final check is non-negotiable — a pattern that isn't trued and verified causes assembly defects at scale, which are far more expensive to fix in production than in the CAD file.

Start your production-ready pattern project →

If your existing patterns fit well and represent the correct design, digitizing preserves that proven investment and protects your intellectual property in a durable digital format — but if the fit is outdated, inconsistent, or poor, starting fresh is almost always more efficient. We offer both services: our digitizing service converts clean paper patterns to Gerber/DXF format, while our pattern making service creates optimized new patterns from scratch or from a reference sample. A brief consultation helps determine which path saves you more time and money.

Book an advisory session to find the right path →

Our standard design-to-production workflow is a 7-step technical pipeline from your design idea to factory-ready digital files, with clear handoff points at each stage. Understanding the full pipeline before you start prevents costly surprises and keeps your timeline on track:

Book a consultation to map your project timeline →

Yes — we develop patterns for complex woven garments including jeans, tailored blazers, structured jackets, and multi-piece activewear, but we do not develop bridal gowns, formal evening wear, neckties, gloves, or designs requiring specialized non-apparel machinery. Complex garments with many components (waistbands, fly fronts, back yokes, pocket bags, belt loops) require more pattern pieces and therefore a higher project cost. Providing a well-fitting reference sample dramatically reduces the revision rounds needed on complex styles.

Discuss your complex garment project →

We engineer patterns with production economics in mind — simplifying construction where possible, minimizing piece count, optimizing pattern shapes for efficient marker nesting, and flagging cost drivers (like complex curved seams or small fiddly pieces) before you commit to bulk production. A well-engineered pattern can reduce factory labor time and fabric waste by 10–20%, which directly impacts your unit cost. We can also perform "value engineering" reviews on existing designs if you need to reduce cost without changing the aesthetic.

Book a production cost advisory session →

Our intake process is straightforward:

• submit your project details via the contact form
• receive a formal itemized quote within one business day
• approve it
• complete payment
• then we'll confirm your project slot and provide shipping instructions for any physical samples

We begin all work within 24 hours of payment. During intake we'll ask about your target fabric, fit model measurements, desired ease, and any reference garments — the more context you give us upfront, the fewer revision rounds you'll need later. New clients are always welcome to schedule a brief call before committing.

Book an intro advisory call or start your project →